12
Jun
2015

922(r) Compliance Calculator

posted Friday, June 12th 2015 at 10:16 AM by

922(r) Compliance

There are a few 922(r) compliance worksheets floating around on the internet, most are really good but quite a few are dated, not functional, and as I discovered when I started my Galil build, inaccurate. I wanted to provide a more up to date resource, and here it is!

Continue Reading...

Tags:

Comments:

View (0) Comments Post a Comment
  • Replying to Adam Konieska on 922(r) Compliance Calculator







30
Mar
2015

How to Fix AK47 Trigger Slap

posted Monday, March 30th 2015 at 8:01 AM by

AK47 Trigger Slap Animation

Trigger slap is a minor, yet common problem shooters of the AKM pattern rifle may experience. This post will get into detail about what trigger slap is, and the specific point during cycling that it happens. I've also provided instructions on how to fix it, as well as discussing a few myths circulating online about trigger slap.

Continue Reading...

Tags:

Comments:

View (2) Comments Post a Comment
  • Replying to Adam Konieska on How to Fix AK47 Trigger Slap







  • chang liu
    Chang Liu
    Wednesday, November 18th 2015 at 1:28 PM

    Adam,
    Excellent write-up on this subject. I have observed another problem with the enlarged Bulgarian style trigger guard rivet and the new ALG AKT triggers. After about 1000 to 3000 rounds, a fellow rifle classmate had his ALG trigger disconnector split in half (bisecting the tail and the hook). The enlarged rivet was nearly beaten down half way with a outline of the tail. This happened once at 3000 rounds and then again at 1000 rounds. So, the englarged rivet puts a lot of additional stress on the disconnector. In addition, the shortened travel of the ALG trigger allows even less room for disconnector travel. I believe the solution to this would be simply to grind off the ALG disconnector tail. Or, harder disconnector spring? Thoughts? Obviously ALG/Geissle will have to rethink think their disconnector design as most Arsenal AK's have the enlarged rivet. This is evident as even my Egyptian Maadi build has a small dent in the standard sized rivet with the ALG disconnector.

    • Replying to Chang Liu







    • Adam Konieska
      AK
      Wednesday, November 18th 2015 at 7:01 PM

      Good points Chang, thanks for the feedback. Very interesting to hear about the failures and at what round count they occurred. The solution you've suggested will work for semi-auto AKs, but the select fire version would still need the disconnector tail, so removing that wouldn't be the solution for AKs as a whole.

      The problem happens when the bottom of the disconnector impacts the trigger, and pushes the trigger forward. The solution would be to remove material from either of those surfaces until the disconnector stops pushing the trigger forward.

      • Replying to AK







13
Mar
2015

Is it Cheaper to Buy or Build an AK47

posted Friday, March 13th 2015 at 9:56 AM by

Cost of Building an AK47

The topic of home-building AK47 rifles comes up every now and then on various firearms boards, which usually leads to questions about the tools involved and the price to build.

The great question, however, is it cheaper to build an AK47 or just buy one off the shelf? I've been home-building firearms for a few years and the answer is simple, it depends...

Continue Reading...

Tags:

Comments:

View (6) Comments Post a Comment
  • Replying to Adam Konieska on Is it Cheaper to Buy or Build an AK47







  • choices
    Choices
    Sunday, June 7th 2015 at 2:43 AM

    Great Job Adam!
    Thanks for a very detailed explanation of the
    comparative cost choices building an AK.

    • Replying to Choices







  • jay
    Jay
    Monday, October 19th 2015 at 7:20 PM

    Thanks for doing this write-up. The parts kits are overpriced for what you're getting!

    • Replying to Jay







  • dns
    DNS
    Monday, November 30th 2015 at 1:39 PM

    You didn't figure cost of your time. We build AK types to sell as a manufacturing FFL. We have all the tools for press builds you mentioned plus other specialty tools, jigs, kiln for heat treatment etc. And all the tools for custom finishing. To take the typical cut up AK parts kit in a bag to a fully finished ready to sell rifle has at least 30 man hours. I estimate that to be our average start to finish. There is no way we can sell rifles for the same or less than what it costs to buy. However there are people who want something different than what you can find in a store and will pay.

    • Replying to DNS







    • Adam Konieska
      AK
      Monday, November 30th 2015 at 6:30 PM

      Good point. The article was geared toward hobbyists. Typically they're more concerned with their own craftsmanship and personal satisfaction than they are with time.

      • Replying to AK







  • lance d.
    Lance D.
    Wednesday, March 9th 2016 at 9:52 AM

    First off, your costs to build your own ak are a joke! If a person has any mechanical ability he can figure out how to build the project without all of the way over priced tools on the market! Doesn't take a genius to build your own "toth" barrel install and removal tool with scrap metal readily available from scrap yards or job sights everywhere. Allthread you can buy or I can bring it home from work in construction. Rivets can be set by hand with a ball peen hammer and patience. You just have to be willing to cut and drill and file or whatever it takes to make your own tools. They don't have to be store bought and they don't have to be pretty, just have to work. When I looked up some of the build tools online I had to laugh at the prices, sorry but I'll make my own and save my money. Common sense and know-how can save you a ton of money if you're willing to get dirty, most people aren't.

    • Replying to Lance D.







  • greg
    Greg
    Friday, May 6th 2016 at 11:46 PM

    Great article, thanks.

    • Replying to Greg







27
Oct
2014

GoPro Weapon Mount Review Part II: Non-Railed Mounts

posted Monday, October 27th 2014 at 7:43 AM by

GoPro Weapon Mount Review Part II: Non-Railed Mounts

In trying to find reviews of GoPro mounts for rifles, I was disappointed that nothing I found online seemed to talk about how to mount them, or if it did, it didn't show any example photos of what the mount looked like, and what the images looked like when mounted.

Just like my earlier review for GoPro mounts for rifles with rails, this review will covers a couple different mounting options if you've got a rifle without rails. Oh yeah, and lots of pictures.

Continue Reading...

Tags:

Comments:

View (0) Comments Post a Comment
  • Replying to Adam Konieska on GoPro Weapon Mount Review Part II: Non-Railed Mounts







20
Oct
2014

GoPro Weapon Mount Review Part I: Picatinny Rail Mounts

posted Monday, October 20th 2014 at 12:05 PM by

GoPro Weapon Mount Review Part I: Picatinny Rail Mounts

So I wanted to find a GoPro mount that would fit nicely on my rifles. When looking for examples or reviews online, I didn't find much that showed how they attached or what the images would look like. So I decided to try a couple and post the results. Enter the contenders:

Continue Reading...

Tags:

Comments:

View (0) Comments Post a Comment
  • Replying to Adam Konieska on GoPro Weapon Mount Review Part I: Picatinny Rail Mounts







14
Aug
2014

Building Your Own Firearms

posted Thursday, August 14th 2014 at 1:00 PM by

80% AR15 Lower Receiver

A few folks have asked me about DIY firearms, like this beauty here. I'll share what I know, what it boils down to is that an individual can make their own firearms provided they are not made with the intent to sell and they are made in accordance with all other local, state, and federal laws.

Continue Reading...

Tags:

Comments:

View (1) Comments Post a Comment
  • Replying to Adam Konieska on Building Your Own Firearms







  • tony lapatka
    Tony LaPatka
    Saturday, April 16th 2016 at 8:37 PM

    I might be an automaton but never a robot!!!
    Enjoyed talking to you on Friday. Thanks for the info. I'll be reading the FAQs at the BATFE website for the next several days.

    • Replying to Tony LaPatka







13
Aug
2014

Suppressed Yugo M85 AK47

posted Wednesday, August 13th 2014 at 1:29 PM by

One of my favorite rifles also one of the ones I built in my basement. Yugoslavian AK47 (M85) in 5.56 with an AAC M4-2000 suppressor. I made it myself from a receiver flat in my machine shop. Lots of labor and engineering went into it. Probably a 50 hour project or so — lots more involved than building an AR.

Its so sexy looking wearing all black:

Suppressed Yugoslavian M85

(2$ bill for scale)

Continue Reading...

Tags:

Comments:

View (3) Comments Post a Comment
  • Replying to Adam Konieska on Suppressed Yugo M85 AK47







  • toops
    Toops
    Wednesday, August 13th 2014 at 5:55 PM

    Where's the 'like' button?

    • Replying to Toops







    • Adam Konieska
      AK
      Wednesday, August 13th 2014 at 8:38 PM

      I thought about adding a Facebook integration, but I didn't want to overload their servers with all the likes.

      • Replying to AK







  • bob
    BOB
    Sunday, June 7th 2015 at 3:56 AM

    I LIKE ...
    SEE so Simple to say!

    Don't need or want to see anything to do with facebutt.
    Hope you don't Garbage up your site with anything to do with it.

    • Replying to BOB